Is the water dispenser on your refrigerator broken? If not, you can attempt to repair the issue by yourself or call Kenosha Appliance Repair for refrigerator repair Kenosha, Wisconsin.
There are many reasons for a water dispenser in a kitchen refrigerator to stop working. Again, some of the reasons might sound a little strange. However, something as simple as an off switch has been the culprit in some instances. Be sure to check the obvious potential issues before proceeding with complicated refrigerator repair. Let’s start to tackle this appliance repair issue and see all of the reasons we can reference for a broken water dispenser on a refrigerator.
The reason for a water dispenser not dispensing is usually an installation error, a filter failure or frozen water tubes:
New Refrigerator Installation Issues
You just purchased a brand new refrigerator for your kitchen with a water dispenser, but it is broken. The water dispenser must be hooked up to the water line. That could be the issue.
If the brand new refrigerator is replacing a prior refrigerator that didn’t feature an ice maker or water dispenser, there is a chance that you do not have a water line running to this area of the kitchen. A water line is typically run from underneath the house either in a crawl space or basement. You can buy this line at just about any hardware store and they’re pretty simple for even the average homeowner to install. Typically they have come with a water shut-off valve, which is important so that if you need to relocate the refrigerator, you can turn off the water.
If you have a water line, is the valve turned on? The valve handle must be in line with the hose. And, is there water going through the pipe that you have used to connect the water line? Obvious and common questions, but things that have to be checked.
If you had to remove the doors during installation the water dispenser might not be plugged in. Check the owner’s manual to find the wire harness for that particular model of refrigerator. Ensure that it is plugged into the refrigerator.
When the water is hooked up, usually there’s air in the line. So, lifting and lowering the dispenser control on the refrigerator to get the air out is necessary.
On some of the popular refrigerators, there are different filters. These filters might “expire”, become clogged or freeze. All of the filters are based on the model and type of refrigerator. If the filter is blocked it will cause slow filling or no flowing. It is suggested that your filter is replaced every 6 months. Replacing filters in a refrigerator can be hard sometimes. If you run into issues, go online and learn the proper method to change a filter.
One idea is to fill up the water filter with water before installation. Typically the water filters take a long time to fill up, which could lead you to believe that the water dispenser isn’t working. You will want to read the manual if all else fails. To be certain it is not air caught in the water lines, depress the dispenser lever for around 5 minutes.
A frozen water tank might be the source of the problem as well on some refrigerators. If the tank is frozen it will leak onto the food bins. Minimal food inside of the fresh food bins can cause freezing to happen.
ADDITIONAL REFRIGERATOR RESOURCES
- Refrigerator Not Cooling
- Refrigerator Noisy
- Refrigerator Ice Maker Not Working
- How Does a Refrigerator Work?